Empress Echo System

Artikelnummer: 1208-1F14642

Das Empress Echo System fordert unser Verständnis über die Möglichkeiten eines Echo-Pedals heraus. Was immer du dir an klassischen, modernen und absolut abgefahrenen Delay sounds vorstellen kannst – das Echo System kann mithalten…

  • 42+ studio quality algorithms and counting – The pedal has 12 algorithm types, all with multiple variations. For example, there are 4 different tape delays on tap.
  • Classic Sounds – Emulations of classic tape and analog units are available, as well as our take on these types of delay.
  • Easy to use and fast to dial in – All the algorithm controls are sitting on a knob in front of you, no fiddling through laborious menus.
  • Tap Functions – Global tap tempo as well as local tempo with lots of subdivisions are available on all modes, in addition to being able to set the delay time directly with the knob.
  • Low Noise signal path – Features a signal to noise ratio of >104dB and maintains an analog dry path.
  • Dual Delay Engines – 2 delays can be used at the same time, each with its own full set of controls and routed in serial, parallel or left/right.
  • Up to 35 Presets – Settings can be saved to 35 presets. With three stomp switches, accessing the presets is easy.
  • 2 Preset Modes – Bank style or scrolling style preset modes.
  • True Bypass and Buffered Bypass – It can be configured to run with true bypass or buffered bypass if you want to hear trails.
  • Cabinet Simulator – 3 variations to choose from, perfect for recording, practicing or for gigs without an amp.
  • Output Transformer – Get hum-free operation when operating in stereo with two amps. Output 2 is isolated with a transformer to eliminate nasty ground loops.
  • High Quality Audio – 48kHz sampling, with 24 bit conversion and 32 bit internal processing.
  • Analog Dry Path – Dry signal is left untouched, and blended with the wet signal using VCA. (no zipper noise, hooray!)
  • Unsurpassed Connectivity – The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI – all using a standard 1/4″ jack!
  • Advanced Configuration Menu – The Advanced configuration menu lets you configure how your delay works. Select from true or buffered bypass, 0-35 presets, MIDI configuration, Control Port(expression pedal, external tap, control voltage and MIDI) as well as which style of preset system to use, input signal pad, output transformer enable and more!
  • Small Size – The enclosure measures approximately 5.7″ by 3.75″ by 1.75″, which is delightfully small when considering all the features packed into this unit.
Share:

Das könnte dir auch gefallen …